Screenplay format looks fussy until you realize it has one job: making a script predictable to read. Producers, actors and script readers all expect the same layout, so every page works out to roughly a minute of screen time and nobody has to decode your choices. Learn six or seven elements and you can write a script that looks like it belongs in the stack.

This guide covers those elements, with extra attention to scene headings, parentheticals and transitions, which are where new screenwriters most often go wrong. After that, we'll look at writing film and TV scripts in Pendrilo Studio and moving them between Fountain and Final Draft.

Screenplay format at a glance

A standard script is set in 12-point Courier, a monospaced font that keeps the page-per-minute rule roughly honest. The left margin is wider than the right to leave room for binding, and each element has its own indent: action runs nearly full width, dialogue sits in a narrower column, and character names sit toward the middle.

You don't need to memorize measurements. Screenwriting software applies them for you, and that is its main reason to exist. What you do need to know is which element each line of your script is:

  1. Scene heading (also called a slugline): where and when a scene happens.
  2. Action: what we see and hear.
  3. Character cue and dialogue: who speaks, and what they say.
  4. Parenthetical: a short note on how a line is delivered.
  5. Transition: an instruction about moving between scenes.

Getting each line into the right element matters more than perfect spacing. Software can fix spacing, but it can't tell what you meant.

Scene headings, action and dialogue

Scene headings

A scene heading has three parts, always in capitals: whether the scene is interior or exterior, the location, and the time of day.

INT. LIGHTHOUSE KITCHEN - NIGHT

INT. means inside and EXT. means outside. Use the same wording for the same place every time. If it's LIGHTHOUSE KITCHEN on page 4, don't call it THE KITCHEN on page 20, because production staff build their schedules from these headings and will treat the two as different locations.

Keep the time of day simple: DAY, NIGHT, DAWN, DUSK. Reserve "LATER" and "CONTINUOUS" for cases where they genuinely help. A new heading is needed whenever the location or time changes, but not for every camera move inside one room.

Action

Action lines describe what the audience can see or hear, in present tense. "Mara drops the key on the table" works. "Mara remembers her father's last winter" doesn't, because a camera can't photograph a memory unless you show it.

Keep paragraphs to three or four lines. White space is how a script signals pace, and a dense block of action reads like a slow scene even if the events are fast. Capitalize a character's name the first time they appear, and add a quick age or defining detail: MARA, 40s, soaked to the knees.

Character cues and dialogue

The character cue is the speaker's name in capitals, with the dialogue directly beneath. Be consistent with names. If the cue is MARA once, it is MARA every time.

You'll also see small extensions in parentheses next to the name. (V.O.) marks a voice-over, (O.S.) marks a speaker who is in the scene but off camera, and (CONT'D) shows the same character continuing after an action line interrupts their speech.

Parentheticals and transitions

Parentheticals: use them sparingly

A parenthetical sits between the character cue and the dialogue and describes delivery or a tiny bit of business.

MARA
(quietly)
You said it was empty.

The rule of thumb: if the line works without it, cut it. Actors and directors resent being told how to speak, and a script full of "(angrily)" and "(sarcastic)" reads like you don't trust your own dialogue. Good uses are rare but real: clarifying who is being addressed in a group scene, flagging irony that would otherwise be misread, or marking a short physical beat like "(to the dog)".

If the parenthetical needs more than a few words, it probably belongs in an action line instead.

Transitions: mostly optional

Transitions such as CUT TO:, DISSOLVE TO: and SMASH CUT TO: are right-aligned instructions about how one scene connects to the next. Modern spec scripts use them far less than older ones. A new scene heading already implies a cut, so writing CUT TO: after every scene just adds clutter.

Use a transition when it does storytelling work: a SMASH CUT for a jarring contrast, a DISSOLVE TO: to show time passing. The two you'll use most are FADE IN: at the very top of the script and FADE OUT. at the end.

The same restraint applies to camera directions. Writing "CLOSE ON the key" is occasionally fine, but a script crowded with shot instructions looks like a first draft from someone who wants to direct.

Film vs TV: what changes

The elements are the same across film and TV, but the shape of the script differs.

  1. Features usually run about 90 to 120 pages. Much longer and readers start to worry before they've read a line.
  2. One-hour dramas tend to land in the 50 to 60 page range, with act breaks marked in the script (often a line like END OF ACT ONE) and a teaser or cold open before the main titles.
  3. Half-hour comedies are shorter, commonly 22 to 35 pages depending on style, and multi-camera sitcoms have their own conventions such as double-spaced dialogue.

Page counts vary by show and by era, so if you're writing a spec for a specific series, read a produced script for that show and match it. Format questions are cheaper to answer from a real example than from a forum.

Writing film and TV scripts in Pendrilo Studio

If you already draft novels in Pendrilo Studio, you don't need a second app to try a script. Studio includes a Screenplays feature that handles both film and TV format, so you can adapt your own book, or write something original, in the same place you keep your outline and codex.

Two practical points about working this way:

  1. Your script stays on your computer. Studio runs on Windows 10 and 11 and doesn't need an internet connection to write. (A Mac version is in testing.)
  2. You can lean on your planning tools. Keep character notes in the Codex and your beats in the Outline or Corkboard, then write the script alongside them.

As with any screenwriting software, the layout is handled for you. Your job is to decide what kind of line you're writing: a heading, action, a character cue, dialogue, a parenthetical or a transition. If you're unsure of the exact controls, the Pendrilo help center covers them. Studio is in beta and all six Pendrilo programs are currently free and fully unlocked, so you can create a free account and try the Screenplays feature without a key or a watermark.

Moving scripts between Fountain and Final Draft

Sooner or later a script has to travel: to a collaborator, a script reader, a contest, a producer. Two formats cover most of those trips, and Studio's Screenplays feature imports and exports both.

What Fountain is

Fountain is a plain-text markup for screenplays. Because it's just text, you can open it in any editor, and it survives decades of software changes. The syntax is light:

  1. A line starting with INT. or EXT. is read as a scene heading.
  2. A capitalized line followed directly by text is a character cue and its dialogue.
  3. Text in parentheses under a character cue is a parenthetical.
  4. A capitalized line ending in TO: is a transition.

Fountain also has ways to force an element when the automatic guess is wrong, such as starting a line with a period to make it a scene heading, or with a greater-than sign to make it a transition. Plain-text scripts also work well with version control and quick note-taking.

What Final Draft is

Final Draft, with its .fdx file format, is the industry's long-standing script software. If a production company or agency asks for your script "in Final Draft," this is what they mean. Exporting an .fdx file from Studio lets you hand over a script they can open in their own tools.

A safe round-trip routine

  1. Save a named version first. Studio keeps a version at every save and every 15 minutes (the last 50), but named versions are kept permanently. Name one "Before import" so you can always get back.
  2. Import or export once, then inspect. Open the result and skim the first ten pages, a dialogue-heavy scene, and the last page.
  3. Check the elements, not just the look. Make sure scene headings are still headings, parentheticals are still parentheticals, and transitions are still right-aligned. Mislabeled elements are the most common conversion problem.
  4. Compare page counts. A big jump after import usually means an element was misread.
  5. Back up the finished script. Studio can back up to a zip, which is worth doing before you send anything out.

Treat anything that exists only in one format, like formatting quirks or notes specific to one program, as something to verify after conversion rather than assume survived. Plain text can't carry everything a full screenwriting program stores, so a quick look after each conversion costs little.

A short checklist before you send it

  1. Every scene starts with a consistent INT./EXT. heading, location and time.
  2. Action is in present tense and in short paragraphs.
  3. Parentheticals are rare and brief.
  4. Transitions appear only where they add meaning.
  5. Page count suits the format: feature, hour or half-hour.
  6. You've opened your exported file and looked at it, not just trusted it.

If you only remember one thing, remember that screenplay format rewards restraint. Fewer parentheticals, fewer transitions and fewer camera directions leave the story to do the talking.